Error CodeMeaningSolution
460lens module failed to open1. power the camera off, take out the battery and leave it for around 5 mins, then reboot the camera. 2. If you are using H2N, please unplugged the H2N and connect again with the right order: boot H2N at first and select USB before connecting with Pro.
462lens module failed to read the command1. power the camera off, take out the battery and leave it for around 5 mins, then reboot the camera.  2. If you are using H2N, please unplugged the H2N and connect again with the right order: boot H2N at first and select USB before connecting with Pro.  3. If the Pro has ever fallen down, there is possibility that some components inside were damaged.
464lens module failed to read dataunplug all USB device and SD card and try again to see if such error disappear, if yes,the problem is probably caused by these device. If the error keeps occur, please reboot the camera.
466lens module gone offlinepower the camera off, take out the battery and leave it for around 5 mins, then reboot the camera.
413>td >press any button to eliminate this error, if it doesn't help, please reboot the camera
450system stuckreboot the camera
414microphone errorIf you are using external microphone, please unplug it and plug again, then re-start the shooting
415optical flow sticthing errorplease try shoot again
417>td >wait and retry
418module was busytry again
430file open errorcheck if the SD card was write-protected
431file io errorcheck if the SD card was write-protected
432storage is not enoughcheck the space of storage device
433>td >add storage device
434writting speed of storage device is not enoughformat the storage device and if it doesn't help, please change another storage device
435MUX write errorreboot the camera
436MUX open errorreboot the camera
437network reconnectingwait
438network reconnecting failedcheck the network
439network disconnectedcheck the network
701/703SD card was lockedcheck if the SD card was write-protected
1001program start-up errorrest or reboot

Please contact technical support team for more information and assistance if you still have any problem/questions.