The software below are updated along with Pro firmware v200 (Beta)

Feature updates:

Pro Win/Mac 1.3.0

1. Add the function to preview and to adjust the curve of brightness during shooting.

2. Preview the display switch button of the new brightness histogram of the area

3. When taking photos, you can choose the shutter priority or ISO priority exposure mode

4. Add 8k@5fps video resolution.

5. Recording during live-streaming adds the requirement of using USB hard disk (recommended SSD hard disk) to record.

6. The camera setting add the limited function of firmware degradation. Once unlocked, the user can make the camera upgrade to latest or go back to original old firmware version. 

Pro iOS/Android 1.1.0

1. Add the function to preview and to adjust the curve of brightness during shooting.

2. Preview the display switch button of the new brightness histogram of the area

3. When taking photos, you can choose the shutter priority or ISO priority exposure mode

4. Add 8k@5fps video resolution.

5. Recording during live-streaming adds the requirement of using USB hard disk (recommended SSD hard disk) to record.

6. (for Android only) As for the WiFi of QR code generator, add the function of one-click to turn on hotspot of phone for users to fill in information.

Function introduction and using techniques

1. Luminance histogram and the curves

When shooting with user’s device connected to the camera, the curve function (which is similar to PS curve function) can be used to adjust the color dynamics. Apart from help setting exposure parameters, this function can help refine the brightness levels in the entire photo to create the effect that the user desires.

Please notice that there is no need to adjust the curves when shooting RAW photos or FlatColor videos. Also, the curve parameters can be saved as camera’s customized parameters for later use.

Check out the brightened dim section under the shades of trees on the shot by using the curve function (Click to play the video below):

2. New function added: when taking photos, you can choose the shutter priority or ISO priority exposure mode.

During photography and timelapse shooting mode, there are auto exposure, manual exposure and isolated exposure. Shutter priority and ISO priority exposure mode are newly added.

3. Add 8k@5fps video resolution.

This resolution is suitable for users who take a panoramic street view, which is equivalent to 5 photos per second. We'll offer more support for street view users in the future.

4. Recording during live-streaming adds the requirement of using USB hard disk (recommended SSD hard disk) to record.

Consider the fact that live-streaming always take up a long period of time, using SD card runs the risk of stability. Hence, the new version will adapt the function of recording during live-streaming to requiring hardware to record during live-streaming (recommended using SSD hardware)

5. (for Android only) As for the WiFi of QR code generator, add the function of one-click to turn on hotspot of phone for users to fill in information.

Because Pro camera's own hot AP signal is not stable, we recommend the user to turn on the hot spots on phone, and generate QR code on app. Use Pro to scan the code to connect phone’s hotspot, the distance of such connection will be longer and the signal will be stronger and more stable.

In WiFi of QR code generator in Android app 1.1.0, we recently add a button to "turn on system hotspot and automatically fill in the information", which is convenient for you to quickly turn on the hotspot and fill in information.

But due to system limiation, iOS can not automatically open hot spots and fill in information, so iOS users have to turn on hot spots manually.

6. The controling app is compatible with older version firmware, it can be used with both the Beta firmware and the official firmware. The software will automatically display the function the using firmware support depends on the firmware version.